Register A Sip Account - Grandstream Networks HT813 Administration Manual

Fxs/fxo port analog telephone adaptor

Hide thumbs Also See for HT813:

Table of Contents

https://arttel.ru/

Register a SIP Account

The HT813 supports 2 SIP accounts. Please refer to the following steps in order to register your accounts

via web user interface

1. Access your HT813 web UI by entering its IP address in your favorite browser.

2. Enter your admin password (default: admin).

3. Press Login to access your settings.

4. Go to FXS ( same steps for FXO ) web pages and set the following:

Account Active to Yes.

Primary SIP Server field with your SIP server IP address or FQDN.

Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.

Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover

SIP Server is defined. If "Yes", account will register to Primary SIP Server when failover

registration expires.

Outbound Proxy: Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.

SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually in the

form of digit similar to phone number or actually a phone number.

Authenticate ID: SIP service subscriber's Authenticate ID used for authentication. Can be

identical to or different from SIP User ID.

Authenticate Password: SIP service subscriber's account password to register to SIP server of

ITSP. For security reasons, the password will field will be shown as empty.

Name: Any name to identify this specific user.

5. Press Apply at the bottom of the page to save your configuration.

https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813

HT813 Administration Guide

Version 1.0.1.2

P a g e

Table of Contents