Roadtrek CS Adventurous Owner's Manual page 52

Heating and Cooling
Optional Webasto Diesel-powered Heating System
If you have the Webasto system you do not have the Alde system.
If your Roadtrek is equipped with the optional Webasto unit, this
unit provides both cabin heat and hot water. The controls are
located behind the TV. To access the Webasto hot water and
cabin heating controls, swivel the television out of the way.
The controller has two dials; the left selects the mode and the
right sets the heating level.
For the left dial, starting at the Lock position and going
clockwise:
• Drain - the unit will lock out for 90 minutes and drain the
system. This is done as a part of winterizing; see HOWTO:
Water System Winterizing
• • Off - unit is off and consumes no electricity
• • Summer mode - first two positions are for Summer use - i.e.,
hot water but no cabin heat.
• • Selects 40 deg. C water temperature
• • Selects 70 deg. C water temperature
• • Winter mode - these two positions are for Winter use - i.e.,
cabin heat with or without hot water. The right knob selects the level of cabin heat.
• • The first position selects cabin heat only and no hot water
• • Second position selects cabin heat and hot water production
• • Frost protection - the last setting on the right is frost protection. In this mode the heater will operate to keep the the water
in the boiler above freezing.
This does not provide any protection for the pipes and faucets in the rest of the Roadtrek. To protect these, perform
the winterization procedure.
For more information, please consult the Owner's Manual for the Webasto Dual Top Evo unit.
Webasto controls
© 2015 by Roadtrek, Inc.
49