Roadtrek CS Adventurous Owner's Manual page 110

HOWTO: Waste Water Dumping
Jammed waste water pump
If the waste water discharge pump stops while you are pushing
the button, it's jammed. Something has gotten caught up in the
blades. Release the button to stop the pump.
• • Locate the manual waste water pump knob just to the right of
the gray and black valve handles.
• • Push in on the knob and turn clockwise; you will feel the knob
engage the pump shaft.
• • Turn the knob first in one direction and then the other to
loosen the obstruction.
• • Once the obstruction is loose, continue dumping by pressing
the pump button again.
Waste water pump manual crank knob
107
© 2015 by Roadtrek, Inc.