Cleaning; Consumables - Agilent Technologies 700 Series User Manual

Cleaning

Any spills in the sample compartment should be wiped up
immediately.
The user (or other authorized personnel) must perform the
appropriate decontamination procedure if hazardous material is
spilled on or inside the ICP-OES.
The exterior surfaces of the ICP-OES should be kept clean. All
cleaning should be done with a soft cloth. If necessary, this cloth can
be dampened with water or a mild detergent. Do not use organic
solvents or abrasive cleaning agents.
Before using any cleaning agent, procedure or decontamination
method except those specified by Agilent, the user (or other
authorized personnel) should check with your local authorized
Agilent field service engineer or representative to confirm that the
proposed method will not damage the equipment.

Consumables

For information on maintaining consumables (such as replacing the
torch, cleaning the cone, replacing the peristaltic pump tubes and
replacing fuses), refer to the Help. Specifically:
1
2
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide
Click Start > All Programs > ICP Expert II > ICP Expert II
Help.
When the ICP Expert II Help appears, click Maintenance to view
step-by-step instructions on how to maintain instrument
consumables.
Maintenance and Troubleshooting
49