Introduction; Site Preparation Requirements - Agilent Technologies 700 Series User Manual

Site Preparation Requirements

Prior to receiving your instrument you will have been provided with
an Agilent 700 Series ICP Optical Emission Spectrometer Site
Preparation Guide, which describes the environmental and operating
requirements of the ICP-OES system. You must prepare your
laboratory according to these instructions before the ICP-OES can be
installed. You should keep the Site Preparation Guide for future
reference for example, if you plan to move your instrument. If you
have misplaced your copy, you can obtain a free replacement from
your local Agilent office.
Position the equipment for easy access to the disconnecting switch
on the rear of the instrument.
Agilent 700 Series ICP Optical Emission Spectrometers User's Guide

2. Introduction

Site Preparation Requirements
User Documentation
Environmental Conditions
Electrical Power Supplies
Other Connections
Gas Supplies
Water Cooling System
Drain Vessel
Introduction
17
18
19
19
20
20
22
23
17