MASSEY FERGUSON 6400 Workshop Service Manual page 99

Disassembly
The lower screws M20x135 (2) and M24x165 (3),
attaching the front frame to the lower engine housing,
are not accessible on 4 WD tractors
screws are facing the drive pinion carrier, which also
serves as a steering ram support.
Front frame / engine splitting takes place in two steps:
- first step: removing the front axle (fixed or
suspended);
- second step: splitting the front frame (radia-
tors/cooler) from the engine
First step: removing the front axle (fixed or
suspended, see chapter 8)
23. Cancel the front axle oscillation (all versions) by
sliding a suitable chock in at each side of the frame
and front axle (1)
24. Chock the rear wheels.
25. Remove the front wheels.
26. Install (Fig.
- a fixed stand at the front of and under the
gearbox;
- a fixed stand under the engine.
MA-02-05120A
Massey Ferguson 6400 - Issue 4.a
¤
H
Splitting the front frame/Sisu engine - MF 6497-6499
(Fig.
(Fig. 11).
12):
10). These
MA-02-05118A
MA-02-05119A
2
3
Fig. 10
1
Fig. 11
Fig. 12
2A30.7