MASSEY FERGUSON 6400 Workshop Service Manual page 199

73. When the elements are assembled, remove the
guide studs. Position the screws according to the
marks made when removed and tighten to a
torque of: (Fig. 10)
- Screws (1): 240 - 320 Nm
- Screws (5): 220 - 280 Nm
- Screws (6): 240 - 320 Nm
- Nuts (3): 300 - 400 Nm
Massey Ferguson 6400 - Issue 1
¤
H
Splitting - GBA10 gearbox / Centre housing
Fig. 14
02C02.15