Using The Remote Control - Kohler K-1166 Installation Manual

Heater
Power
On/Off
On/Off

11. Using the Remote Control

NOTE: There are two types of remote controls available: a basic unit and a unit with controls for
chromatherapy and effervescence. Determine which unit you have and follow the corresponding
directions.
NOTE: Your remote requires two AAA batteries. To install or replace them, simply unscrew the base of the
remote.
Your overflowing bath is equipped with a waterproof remote.
To turn the pump and the chromatherapy lights on and off, press the power button.
To reheat the water in the overflowing bath as it circulates, turn the heater on by pressing the heater icon
(the heater defaults to "On" when the pump is turned on). Press the heater icon again to turn the heater off.
The heater will not operate if the pump is off. If the heater is on, the pump switch will be dark green. If the
heater is off, it will be yellow-green.
To cycle the chromatherapy lights through the spectrum of colors, press the chromatherapy cycle icon.
To lock an individual chromatherapy color in, press the chromatherapy specific color icon.
Kohler Co.
Heater
On/Off
Chromatherapy
Specific Color
Selection
13
Power
On/Off
Effervescence
Mode
Chromatherapy
Cycle
1054216-2-A