BMW M5 Sedan Owner's Manual page 280

CONTROLS
4. "Pre-ventilation"
5. "Start now"
Via BMW display key
Turning on
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. "Activate now"
5. "Start"
Turning off
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. "Stop"
Display
icon on the automatic climate control indi‐
cates the system is switched on.
REST is shown on the climate control display.
The residual engine heat is used.
Departure time
Principle
Different departure times can be set to ensure a
comfortable interior temperature in the vehicle at
the time of departure.
▷ One-time departure time: the time can be
set.
The system is switched on once.
▷ Departure time with weekday: time and day
of the week can be set.
On the desired weekdays, the system will be
switched on before the set departure time.
The departure time is preselected in two steps:
280
Climate control
icon.
icon.
Online Edition for Part no. 01405A37B39 - VI/21
▷ Set departure times.
▷ Activate departure times.
A minimum of 10 minutes should pass between
setting/activating the departure time and the
planned departure time to allow a sufficient pe‐
riod of time for the climate control.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Pre-ventilation"
5. "Departure plan"
6. Select the desired departure time.
7. Set the departure time.
8. Select day of the week, if needed.
9. "OK"
Via BMW display key
1. Switch on the display of the BMW display
key.
2. "Preconditioning setting"
3. Tap the icon or the
4. Select the desired departure time.
5. Set the departure time.
6. Select day of the week, if needed.
7. "OK"
Activating the departure time
Functional requirement
To switch on the parked-car ventilation automati‐
cally at the departure time, the departure time
must be activated first.
Via iDrive
1. "CAR"
2. "Settings"
icon.