BMW M5 Sedan Owner's Manual page 163

Adjusting the unit
Depending on the country version, it may be
possible to set the unit for the digital tachometer.
1. "CAR"
2. "Settings"
3. "General settings"
4. "Units"
5. "Distance"
6. Select the desired setting.
Display
The current speed is displayed in
the instrument cluster.
M Steptronic Sport
transmission: gear display
with Drivelogic
Sequential mode
▷ Gear shift indicator, arrow 1.
▷ Engaged gear, arrow 2.
▷ Selected Drivelogic program,
arrow 3.
Drive mode
▷ Engaged gear together with a
D, arrow 1.
▷ Selected Drivelogic program,
arrow 2.
Range
Principle
The range indicates the distance that can still be
covered with the current full tank of fuel.
Online Edition for Part no. 01405A37B39 - VI/21
Displays
General information
The estimated range available with the remaining
fuel is permanently displayed in the instrument
cluster.
With a low remaining range, a Check Control
message is briefly displayed. With a sporty driv‐
ing style, for instance fast cornering, the engine
function is not always ensured.
The Check Control message appears continu‐
ously below a range of approx. 30 miles/50 km.
Safety information
NOTICE
With a driving distance of less than
30 miles/50 km the engine may no longer have
sufficient fuel. Engine functions are not en‐
sured anymore. There is a risk of damage to
property, among other potential damage. Re‐
fuel promptly.
Display
The current range is displayed as
numerical value next to the fuel
gauge.
Service notifications
Principle
The function displays the service notifications
and the corresponding maintenance scopes.
General information
After switching on drive-ready state, the instru‐
ment cluster briefly displays available driving dis‐
tance or time to the next scheduled mainte‐
nance.
A service advisor can read out the current serv‐
ice notifications from your vehicle key.
CONTROLS
163