BMW M5 Sedan Owner's Manual page 112

CONTROLS
Pressing the switch again
stops the motion.
▷ Briefly press out the switch twice in succes‐
sion toward the front past the resistance
point.
The glass sunroof and sun protection are
closing together.
Pressing the switch again stops the motion.
Comfort position
In some models, the wind noises in the car's in‐
terior are lowest when the glass sunroof is not
fully open. In these models, the automatic func‐
tion initially only opens the glass sunroof up to
this comfort position.
Pressing the switch again opens the glass sun‐
roof fully.
Jam protection system
Concept
The jam protection prevents objects or body
parts from becoming jammed between the roof
and glass sunroof while the glass sunroof is clos‐
ing.
General information
If a resistance or blockage is detected while the
glass sunroof is closing, the closing operation is
interrupted once the roof reaches the half-open
position, or it is stopped when closing from the
tilted position.
Closing from the open position
without jam protection
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol‐
lows:
112
Opening and closing
Online Edition for Part no. 01405A37B39 - VI/21
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a spe‐
cific threshold, closing is interrupted.
3. Push the switch forward again past the resist‐
ance point and hold until the glass sunroof
closes without jam protection. Make sure that
the closing path is clear.
Closing from the lifted position
without jam protection
In case of danger from the outside or if icing
might prevent normal closing, proceed as fol‐
lows:
1. Close all doors.
2. Push the switch forward past the resistance
point and hold.
Initializing after a power
interruption
General information
After a power interruption during the opening or
closing process, the glass sunroof can only be
operated to a limited extent. Initializing the sys‐
tem can help in this case.
The system can be initialized under the following
conditions:
▷ The vehicle is parked in a horizontal position.
▷ The vehicle will not be moved until the initiali‐
zation is completed.
▷ The drive-ready state is established.
▷ The outside temperature is above 41 ℉/5 ℃.
During initialization, the glass sunroof closes
without jam protection.