BMW M5 Sedan Owner's Manual page 148

CONTROLS
Low Speed Assistant
Principle
The Low Speed Assistant gives assistance at
very low speeds. The vehicle moves at walking
speed.
General information
Use the Low Speed Assistant for maneuvering or
in stop-and-go traffic.
The Low Speed Assistant can also be used for
rocking the vehicle in the snow. To do this,
change over between reverse gear and forward
gear without stepping on the brakes in the proc‐
ess.
Activating
1. Switch on drive-ready state while pressing on
the brake pedal.
2. If necessary, release the parking brake.
3. If necessary, deactivate Automatic Hold.
4. Engage selector lever position D/S or R.
5. Release brake.
In 1st and 2nd gear and in reverse, the vehicle
rolls at minimum speed.
Deactivating
Decelerate the vehicle to a stop.
Drivelogic
Principle
Drivelogic changes the gear-shifting characteris‐
tics of the M Steptronic Sport transmission.
For example, the shifting points are changed in
Drive mode and the shifting times in sequential
mode.
General information
Three Drivelogic programs are available.
148
Driving
Online Edition for Part no. 01405A37B39 - VI/21
After each switch between Sequential mode and
Drive mode, the last program selected is an ac‐
tive.
If the drive-ready state is switched on after the
vehicle has been in the idle state and is in Drive
mode, the D1 program is activated.
Programs
Pro‐ Drive mode
gram
Efficient driving.
D1/S1
Fast driving.
D2/S2
Sporty driving.
D3/S3
Selecting a program
Via the rocker switch on the selector lever
Press the rocker switch repeatedly until
the desired program is displayed in the
instrument cluster.
Via iDrive
It is possible to configure the required program
for buttons M1 or M2.
1. "CAR"
2. "M menu"
3. "Configure M1" or "Configure M2"
Sequential
mode
Comfortable shift‐
ing operations.
Sporty, fast shift‐
ing operations.
Maximum shifting
speed, Launch
Control.