Car - BMW M5 Sedan Owner's Manual

Hide thumbs Also See for M5 Sedan:
Table of Contents

Advertisement

Button
Function
Change the entertainment
source.
Pressing the button again will
close the currently displayed
list.
Show list of most recent tele‐
phone calls.
Turn the thumbwheel to select
the desired setting.
Press the thumbwheel to con‐
firm the setting.
The list of the current entertain‐
ment source can be displayed
in the instrument cluster again
by turning the thumbwheel.
Trip data
Principle
Values for the trip, such as the average con‐
sumption or trip kilometers, are displayed.
General information
The trip data can be displayed on the Control
Display and in the instrument cluster.
The values can be displayed and reset depend‐
ing on various intervals, such as after refueling.
Display on the Control Display
Overview
The following information is displayed depending
on the equipment and the set interval and driving
mode:
Configured interval for displaying trip data.
Average fuel consumption depending on the
configured interval.
Average speed.
Online Edition for Part no. 01405A37B39 - VI/21
Displays
Total time for shut off engine through the
Auto Start/Stop function.
Consumption history in form of a chart.
Displays
1.

"CAR"

2.
"Driving information"
3.
"Trip data"
Consumption history
The average consumption is shown in the con‐
sumption history in form of a chart based on the
distance traveled.
Display in the instrument cluster
Depending on the equipment, information about
the route can be displayed as widget in the in‐
strument cluster.
The following information is displayed:
Total kilometers.
Configured interval for displaying trip data.
Distance traveled depending on the config‐
ured interval.
Average speed.
Selecting and setting widgets in the instrument
cluster.
Additional information:
Widgets, refer to page 154.
Adjusting the display of the trip
data
The intervals for the display of the trip data in the
instrument cluster and on the Control Display are
adjustable.
1.
"CAR"
2.
"Driving information"
3.
"Trip data"
4.
"Data since"
5.
Select the desired setting:
CONTROLS
167

Advertisement

Table of Contents
loading

Table of Contents