BMW M5 Sedan Owner's Manual page 278

CONTROLS
Switching off using the button
Press and hold the left side of the but‐
ton.
Temperature
Principle
The automatic climate control cools or heats to
the configured temperature and then keeps the
temperature constant.
Setting the temperature
Turning wheel clockwise or coun‐
ter-clockwise: lowering or raising
the temperature.
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Maximum cooling
Principle
The system is set to the lowest temperature, op‐
timum air flow and recirculated-air mode with the
drive-ready state switched on.
Functional requirement
The function is available with outside tempera‐
tures above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Switching maximum cooling on/off
Press the button.
The LED of the button is illuminated
when maximum cooling is switched on.
Air flows out of the air vents to the upper body
region. The air vents need to be open for this.
278
Climate control
Online Edition for Part no. 01405A37B39 - VI/21
AUTO program
Principle
The air flow, air distribution and the temperature
are controlled automatically.
Switching the AUTO program on/off
Press the button.
The LED of the button is illuminated
with the AUTO program switched on.
Depending on the selected settings and outside
influences, the air is directed to the upper body
and into the floor area.
Controlling the intensity of the air
flow
With the AUTO program activated, the automatic
intensity control can be changed:
Pressing the left or right side of the but‐
ton repeatedly: decrease or increase in‐
tensity.
The selected intensity is shown on the display of
the automatic climate control.
Air flow, manual
Principle
The air flow for climate control can be adjusted
manually.
General information
To adjust the air flow manually switch off AUTO
program first.
Adjusting the air flow manually
Pressing the left or right side of the but‐
ton repeatedly: decrease or increase air
flow.
The selected air flow is shown on the climate
control display.