Table of Contents
Advertisement
HDMI Device (Optional)
Devices supporting HDMI can connect and play back
through this unit (for example, iPhone or other
Smartphones).
• The HDMI/MHL connecting cable differs depending on the
connected device corresponding to HDMI. Prepare optional
HDMI/MHL connecting cable sets suitable for your device.
WARNING
It is dangerous for the driver to watch video while
driving the vehicle. The driver may be distracted
from looking ahead and an accident could occur.
Install the unit correctly so that the driver cannot
watch video unless the car is stopped and the
parking brake is applied.
If the unit is not installed correctly, the driver will be
able to watch video while driving and may be
distracted from looking ahead and cause an
accident. The driver or other people could be
severely injured.
HDMI Operation
■
iPhone, Smartphone, etc.
The output of your electronic device will be mirrored on this
unit through the HDMI connector. Control from this unit is
not possible.
• In HDMI player mode, the screen of the device displays the
content of electronic equipment by mirror image.
• The electronic device must possess an HDMI output interface.
• Not all devices with an HDMI output interface can be
recognised by this unit.
• Use only the Alpine Special HDMI connection cable.
1
Press the
(HOME) button to select HDMI.
The display shows the HDMI mode screen.
2
During the HDMI playback, touch and hold
the screen to display the operation screen.
The HDMI operation screen is displayed for about 5
seconds.
• For your safety, video is not displayed and only audio can be
heard while driving.
44
-EN
ALPINE iLX-F509E 68-41657Z84-A (EN)
Source Title
• The name which is given as the source name in
"Setting the HDMI Name" (page 20) is displayed.
Displays the HDMI Setup Menu screen (page
20)
Switching Display Modes
HDMI1/HDMI2 switch
• This switch appears when the HDMI Selector setting is
[On]. See "Setting the HDMI Selector" (page 20). The
switch name of HDMI1 becomes the same as the
source title.
Switching the HDMI Input
When the optional HDMI Selector is connected, up to 2
HDMI devices can be connected. The HDMI devices can be
switched during HDMI playback.
• Make sure to set the HDMI Selector setting to [On]. See
"Setting the HDMI Selector" (page 20).
• The displayed name of HDMI1 varies according to the HDMI
Name setting. See "Setting the HDMI Name" (page 20).
Touch [HDMI1 (or Digital TV)] or [HDMI2].
The current HDMI mode can be checked in the Source Title
located in the upper part of the HDMI operation screen.
Advertisement
Table of Contents
