Instrument Compatibility; Reprocessing And Storage; Repair And Modification; Signal Words - Olympus UHI-3 Instructions Manual

Instrument compatibility

Reprocessing and storage

Repair and modification

Signal words

HIGH FLOW INSUFFLATION UNIT UHI-3
Refer to the "System chart" in the Appendix to confirm that this instrument is
compatible with the ancillary equipment being used.
Using incompatible equipment can result in patient injury and/or equipment
damage.
This instrument was not disinfected or sterilized before shipment. Before using
this instrument for the first time, reprocess it according to the instructions given
in Chapter 6, "Care, Storage and Disposal".
After using this instrument, reprocess and store it according to the instructions
given in Chapter 6.
Improper and/or incomplete reprocessing or storage can present an infection
control risk, cause equipment damage or reduce performance.
This instrument does not contain any user-serviceable parts. Do not
disassemble, modify or attempt to repair it; patient or user injury and/or
equipment damage can result.
Some problems that appear to be malfunctions may be correctable by referring
to Chapter 7, "Troubleshooting".
If the problem cannot be resolved using the information in Chapter 7, contact
Olympus.
The following signal words are used throughout this manual:
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Important Information — Please Read Before Use
5