Table of Contents
Advertisement
Chapter 6 Care, Storage and Disposal
6.5
Storage of the UHI-3 main body, foot switch,
cylinder hose and medical gas pipeline adaptor
6.6
Cleaning the insufflation tube (MAJ-590) and
suction tube (MAJ-591) prior to sterilization
58
•
The equipment must be completely dry prior to storage.
Residual moisture can present an infection control risk.
•
Do not store the equipment in the shipping box, as this can
present an infection control risk.
•
Make sure dust or other foreign matter does not penetrate
into the hose.
1.
Disconnect all power cords and coil them loosely; do not crush or bend them
when storing. Handle the equipment carefully; it can be damaged if dropped
on a hard surface.
2.
Place the UHI-3 horizontally on a stable, level surface.
3.
Store the equipment at room temperature in a dry, well ventilated
environment. Do not store in direct sunlight.
4.
Store the wrench with the cylinder hose.
5.
Coil the foot switch cord loosely; do not crush or bend it when storing.
Handle the foot switch carefully; it can be damaged if dropped on a hard
surface.
•
After each use, perform the following cleaning procedure
immediately. If cleaning is delayed, residual organic debris
will begin to solidify and it may be difficult to effectively
reprocess the equipment.
•
Always wear personal protective equipment to assist in
reducing infection control risks and tissue irritation.
•
Rinse thoroughly; residual detergent solution may cause
staining or corrosion.
HIGH FLOW INSUFFLATION UNIT UHI-3
Hide quick links:
Advertisement
Table of Contents
