Power Management; Pause; Flex Control - Samsung NZ64K5747BK User Manual

Power management

The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost
Power Management automatically reduced the heat setting of cooking zone.
3
1
4
2

Pause

The Pause function simultaneously switches all cooking zones that are
switched on to the low power setting and then back to the heat setting that was
previously set. This function can be used to briefly interrupt and then continue the
cooking process e.g. to take a telephone call.
When the Pause function is activated, all touch sensors except for the Pause
, Lock and the On/Off control
touch the Pause sensor again.
Control Panel
To Switch On
Touch Pause
To Switch Off
Touch Pause
NZ64K5747BK_EE_DG68-00799A-03_SV+NO+FI+DA+EN.indb 21
function,
• No.1 and No.2 is paired
• No.3 and No.4 is paired
The indicator for this cooking zone
alternates for some seconds between the set
heat setting and the maximum possible heat
setting. After then, the indicator changes
from the set heat setting to maximum
possible heat setting.
sensors are disabled. To resume cooking,
Display
Return to previous power level

Flex control

The Flex function can operate complete left side cooking zone for using large size
cookware. (example : oval cookware, fish kettle)
1.
2.
NOTE
Touch the Flex zone sensor during opertaing, Flex zone function will be off.
NOTE
If you touch Flex zone sensor while each burner operation different level, burner
set at a high level.
Touch the Flex zone sensor.
For setting and adjusting the power
level, touch the Heat setting sensor.
English 21
4/10/2017 6:06:32 PM