Table of Contents
Advertisement
Power management
The cooking zones have a maximum power available to them.
If this power range is exceeded by switching on the Power Boost
Power Management automatically reduced the heat setting of cooking zone.
2
1
3
Pause
The Pause
function simultaneously switches all cooking zones that are
switched on to the low power setting and then back to the heat setting that was
previously set. This function can be used to briefly interrupt and then continue the
cooking process e.g. to take a telephone call.
When the Pause
function is activated, all touch sensors except for the Pause
, Lock
and the On/Off control
touch the Pause
sensor again.
Control Panel
To Switch On
Touch Pause
To Switch Off
Touch Pause
NZ63K5727BK_EF_DG68-00796A-00_EN.indd 21
function,
•
No.1 is only one cooking zone
•
No.2 and No.3 is paired cooking zone
The indicator for this cooking zone
alternates for some seconds between the set
heat setting and the maximum possible heat
setting. After then, the indicator changes
from the set heat setting to maximum
possible heat setting.
sensors are disabled. To resume cooking,
Display
Return to previous power level
Sound on/off
1.
2.
3.
4.
NOTE
Turn on the Power, It is not possible to operate sound on/off control after
10 seconds.
Touch the On/Off control
sensor for
approximately 1 ~ 2 seconds.
Touch the Pause
sensor for
3 seconds within 10 seconds after
Power On.
Sound will OFF and
will show in the
display.
To change Sound setting, repeat No1
and No2 procedure.
Sound will ON and
will show in the
display.
English 21
3/2/2016 1:56:58 PM
Advertisement
Table of Contents
