4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
2. Place the RFID Module on the RFID Plate as shown in the picture below. Place the two Spacers
(short) under the RFID Module, and secure them to the RFID Plate with the two SMW-2x10 Screws.
SMW-2x10 Screw
Nylon Washer
4.11.5 Attaching the RFID Module
1. Fit the Bush into the hole as shown in the picture below.
Spacer (short)
When viewed from the printer front side.
4-75
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
RFID Module
RFID Plate
Bush
EO18-33027
(Revision Date: Aug. 24, 2011)
SMW-2x10
Screw
Nylon Washer
Spacer
(short)