Toshiba B-EX4 Series Maintenance Manual page 43

EO18-33027
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
4.3 PEEL-OFF MODULE (B-EX904-H-QM-R)
4.3.4 Attaching the Rewinder Guide Plate
1. When using the printer in built-in rewinder mode, attach the Rewinder Guide Plate to the front of the
printer with the two C-4x6 screws.
 Hook the left side of the Rewinder Guide Plate onto the Strip Plate.
Strip Plate
Hook
Rewinder Guide Plate
C-4x6 Screw
C-4x6 Screw
 Secure the right side and lower left of the Rewinder
Guide Plate with the C-4x6 screws.
2. Set the selection switch mounted on the Rewinder Ass'y to REWINDER position.
Rewinder Ass'y
4-25