Log Save Operation Example; Lcd Messages And Led Indications - Toshiba B-EX4 Series Maintenance Manual

6. ON LINE MODE

6.10.5 Log Save Operation Example

[Online mode]
[Pause mode]
1. Normal condition
[Log save mode]
Log files are saved.
(Nothing happens to the
LCD.)
After saving the log file,
the printer restarts.

6.11 LCD MESSAGES AND LED INDICATIONS

LCD Message
No nd
2 line
（English）
1 ONLINE
2 HEAD OPEN
3 PAUSE
4 COMMS ERROR
5 PAPER JAM
↓ Hold down the [ENTER] key for 3 seconds.
↓ The log file has been saved.
B-EX Series
Initializing...
LED
indications
ON
ERROR
LINE
● In the online mode

In the online mode
●

(Communicating)
In the online mode with a ribbon
 
near end detected (Note 3)
A feed or an issue was attempted
● ●
with the head opened.
A feed or an issue was attempted
● with the head opened in a ribbon

near end state.
In a pause state
● ●
In a pause state with a ribbon
●

near end detected (Note 3)
A parity error or framing error has
● occurred during communication

by RS-232C.
A paper jam occurred during
paper feed.
Paper was not set properly.
Label actually used and the
selected media sensor type do
not match.
● The media sensor position does

not align with the black mark
position.
The actual media size and the
specified media length do not
match.
The level of media sensor is not
6. 11 LCD MESSAGES AND LED INCATIONS
After saving the log file, the printer automatically restarts.
Release the [ENTER] key at this timing.
Printer status
6-25
EO18-33027
Acceptance of
Restoration by
Status Request
the [RESTART]
and Reset
key
Command
Yes/No
Yes/No
--- Yes
--- Yes
--- Yes
--- Yes
--- Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes