Siemens 8DA Installation Instructions Manual page 17

Fig. 9: Setting down from the narrow side of the floor
opening
a
Transport unit
s
Floor opening
d
Door to the switchgear room
Setting down the transport
units from the narrow side
of the floor opening
=USNJVOTPKV=G=fkpq^iiqflk=fkpqor`qflkp=Ua^=G=oÉîáëáçå=MP
Precondition: The transport units must be standing on the roller pads / bars without
pallets.
DANGER!
The transport units can fall down when they are moved over the floor opening.
!
When moving the transport unit on the floor opening, take care that the roller pads
/ bars are always touching the foundation completely.
!
Check the moving direction of the transport unit all the time.
Fig. 10: Setting down from the long side of the floor open-
ing
fåëí~ää~íáçå
17