Drilling Holes For The Clutch - Toro 78490 Operator's Manual

Description
Bagger mounting bracket—left
Bagger mounting bracket—right
Bolt, 1/4 x 3/4 in.
Bolt, 3/8 x 1 in.
Carriage bolt, 3/8 x 7/8 in.
Bolt, 5/16 x 3/4 in.
Bolt, 5/16 x 1 in.
Flange nut, 1/4 in.
Flange nut, 5/16 in.
Flange nut, 3/8 in.
Locknut, 3/8 in.
Flat washer, 3/8 in.
Flat washer, 5/16 in.
Bagger
Clevis pin
Hairpin cotter
Tensioner pulley and arm with hardware
Spring
Bagger belt
Weight—left
Weight—right
Weight bracket—left
Weight bracket—right
Support plate
Bolt, 3/8 x 6–1/2 in.
Bolt, 5/16 x 1 in.
Nut, 3/8 in.
Lock washer, 3/8 in.
Flat washer, 3/8 in.
Bolt, 3/8 x 4–1/2 in.
Bolt, 3/8 x 3/4 in.
Self tapping bolt, 3/8 x 5/8 in.

Drilling Holes for the Clutch

Use the metal template, included with the bagger, to locate
the clutch holes.
Qty. Use
1
1
2
4
4
4
4 Installing bagger mounting brackets
2
8
4
4
4
8
1
2 Installing the bagger
2
1
Installing the bagger tensioner pulley and
1
bagger belt
1
1
1
2
2
1
4
Installing the weights
2
8
8
16
4
2
1
1. Remove the clutch strap for the clutch (Fig. 2).
2. Unplug the clutch connector (Fig. 2).
5