Advertisement
IM 701989-01E
Inserting/Removing Multiple Adjacent Probe Head Stacks
When connecting multiple PBL250 Logic Probes, you can arrange probe head
stacks side-by-side or back-to-back. If the GND terminal is separated, connect
a 250 mm GND lead to a common GND terminal, then connect to GND on the
PCB.
Using a longer GND lead lowers performance.
Connection Using a Stacking Spacers
When stacking the probe heads, you can connect probe heads to only the
desired pins by using stacking spacers.
Stacking spacers
Common GND
terminal
250 mm GND lead
7
Advertisement
