Advertisement
Stacking Multiple Probe Heads for Connecting to Pin Header
Stacking holder
Multiple probe heads
are stacked using a
stacking holder
Connects to pin headers all at once
To remove the stacking holder, pinch the grooved portion with your fingertips. If
the stacking holder is difficult to remove, insert a thin flat object such as a ruler
into the groove.
Groove
Stacking holder
Connection Using a 250 mm GND Lead (Inserting/Removing
Multiple Bits at Once)
Connect a 250 mm GND lead to a common GND terminal, then connect to GND
on the PCB.
Using a longer GND lead lowers performance.
Common GND terminal
250 mm GND lead
6
IM 701989-01E
Advertisement
