Names And Functions Of Parts - YOKOGAWA 701989 User Manual

Names and Functions of Parts

2
Probe lead set
Common GND
terminal
Probe Lead Set
Connects the probe heads for each bit to the logic probe, and consists of 8 probe
leads and 2 common GND terminals.
Probe Heads
Connect directly to 2.54 pitch pin headers on the circuit board, or to the circuit
under test using various attachments.
Removable GND terminal
A ground terminal that can be removed in order to attach a separate GND lead in
case the GND terminal on the circuit board is separated from the signal terminals.
Common GND terminals
The points of connection for 250 mm GND leads. They are of the same electric
potential as the GND terminals on the ends of the leads and the grounding of the
connected oscilloscope.
Cable
Connects to the oscilloscope's logic signal input port.
Logic probe
GND terminal
Cable
Probe head
GND terminal
Signal input terminal
Removable GND
terminal
IM 701989-01E