Changing The Brightness Of The Image; Using The Self-Timer To Take Photos - FujiFilm inxtax mini Evo FI019 User Manual

Miscellaneous Actions

Changing the Brightness of the Image

Adjust the brightness of the image. Use this function when the
subject is too bright or too dark, or when there is much contrast
(difference between light and dark) between the subject and the
background.
1
Press or until [EXPOSURE] appears on the
shooting screen�
2
Press or to correct the exposure�
• Press to correct the exposure to the + side to brighten
the entire image.
• Press to adjust the exposure to the - side to darken the
entire image.
3
Press the Shutter button all the way down�
EXPOSURE

Using the Self-Timer to Take Photos

Use this function to take a group photo including the
photographer or to prevent the camera from moving while the
Shutter button is pressed.
1
Press or until [SELF-TIMER] appears on the
shooting screen�
10 SEC
2 SEC
OFF
2
Press or to select [2 SEC] or [10 SEC]�
The icon corresponding to the set self-timer appears in the
center of the screen.
• If you do not want to set a self-timer, select [OFF].
3
Press the Shutter button all the way down�
The countdown starts.
When [2 SEC] is selected:
When you press the Shutter button, the self-timer light
flashes for 2 seconds before taking the photo.
When [10 SEC] is selected:
When you press the Shutter button, the self-timer light lights
up and starts flashing three seconds before taking the photo.
To cancel the self-timer halfway through, press
NA_EN
SELF-TIMER
(Back).
17