Table of Contents
Advertisement
About the Remaining Film Sheets Display
The number of remaining film sheets is indicated by a white dot at
the bottom of the screen. Each time you print an image, this dot
turns gray. When there are only two film sheets remaining in your
loaded film pack, the dot turns red.
10 sheets remaining display
2 sheets remaining display
0 sheets remaining display
• For details on film handling, see the instructions provided
with the INSTAX MINI instant film pack.
• Film develops in about 90 seconds (time may vary with
temperature).
Adding Effects to Your Photos
Selecting a Lens Effect
Follow the steps below to select a lens effect.
1
Display the shooting screen�
2
Rotate the Lens dial to select the lens effect�
The following screen appears.
LENS #1
Normal
• To remove the applied lens effect, select [Normal] from
the lens effect menu.
• Press the Effect reset button to cancel the applied lens
and film effects.
You can also press the + (Function) button to set your favorite
lens and film effect combinations.
NA_EN
15
Advertisement
Table of Contents
