Configuring Heatbot®-Wi-Fi Water Heater With Alexa - A.O. Smith HeatBot Wi-Fi User Manual

Configuring HeatBot®-Wi-Fi Water Heater with Alexa
• Configure the HeatBot®-Wi-Fi Water heater in the
• Change appropriate name for your devices which will be used in
1. Download Amazon "Alexa"
"Downloading and Installing AO Smith Smart App"
2. Configure Echo/Echo Dot devices with
3. Search "AO Smith Smart" skill from the
"AO Smith
4. Click Enable skill of
5. Input your AO Smith Smart account username and password, you'll be redirect to the success
page;
6. Now the Alexa Integration setup is finished.
As an example, change the Water heater device name as
can be changed as per customer desire and same device name should be used in
Smart"
skills.
Figure 16
Heating / Standby Operation
There are two types of operation depending on the actual water temperature inside the inner
tank of the Water Heater and set temperature.
Heating operation
When the actual temperature of the water is
less than the set temperature, it enters into
Heating operation. The Heating LED indicator
glows as shown in "Figure
Figure 17
When the temperature of the water drops by 5°C from the set temperature due to usage of
water, the Water Heater again enters into the Heating operation.
"AO Smith Smart App"
APP from Android ,iOS or Amazon APP market (Refer
"Alexa"
APP.
"Alexa" APP skills category.
Smart", and you'll be navigated to
"AO Smith Water Heater"
Alexa, turn on the
"AO Smith Water Heater"
Alexa, turn off the
"AO Smith Water Heater"
Alexa, set the
"AO Smith Water Heater"
Alexa, increase the
"AO Smith Water Heater"
Alexa, decrease the
Alexa, what's the temperature of the
Standby operation
After the Water Heater reaches set
temperature, it will enter into the Standby
operation due the cut-off power and Heating
17". LED indicator switch off as shown in
18".
Figure 18
16
.
"AO Smith Smart"
)
"AO Smith Smart"
"AO Smith Water Heater"
to 60 degrees
temperature
temperature
"AO Smith Water Heater"
skills;
login page;
(Device name
"AO Smith
"Figure