Rear Bearing Carrier Bushing Replacement; Rear Bearing Carrier Installation - Polaris RZR 570 2013 Service Manual

REAR BEARING CARRIER BUSHING
REPLACEMENT
Check bearing carrier bushings and pivot tubes for
excessive wear or damage. If replacement is required,
slide pivot tubes out and remove bushings with a drift
punch. Install new bushings by pressing them into the
bearing carrier.
9926813 R04 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.

REAR BEARING CARRIER INSTALLATION

1. Install drive shaft axle through the backside of the
bearing carrier. Be sure bushings and pivot tubes are
installed.
2. Install the fasteners that attach the rear bearing
carrier to the upper and lower A-arms. Torque NEW
nuts to specification.
TORQUE
Upper and Lower Rear Bearing Carrier Nuts:
40 ft-lb (54 Nm)
3. Apply grease to drive shaft axle splines.
FINAL DRIVE
7
7.9