Install Bulb; Efi Battery Replacement; Remove Battery - Ariens Sno-Thro Deluxe Series Service Manual

6. Turn bulb one-eighth turn counterclockwise and
remove from headlight bezel. See Figure 118.

Install Bulb

NOTICE: DO NOT touch new bulb with bare hands; wear
clean gloves. Body oil on a headlight bulb can increase
bulb temperature and reduce life of the bulb.
1. Install bulb into headlight bezel and turn one-eighth
turn clockwise.
2. Connect bulb to wire harness.
3. Reinstall headlight housing into control panel and
secure with two tapping screws.
4. Reconnect spark plug wire.
Figure 118

EFI BATTERY REPLACEMENT

Model 921049

Remove Battery

IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire.
3. Disconnect wire harnesses from ECU.
4. Remove hardware retaining ECU bracket and remove
bracket. See Figure 119.
EN – 51
Figure 119