Ariens Sno-Thro Deluxe 30 EFI Operator's Manual
  1. Manuals
  2. Brands
  3. Ariens Manuals
  4. Snow Blower
  5. Sno-Thro Deluxe 30 EFI
  6. Operator's manual
Ariens Sno-Thro Deluxe 30 EFI Operator's Manual

Ariens Sno-Thro Deluxe 30 EFI Operator's Manual

Hide thumbs Also See for Sno-Thro Deluxe 30 EFI:
Table of Contents

Advertisement

Quick Links

Deluxe Series
Model
921049 – Deluxe 30 EFI
(SN 035000 +)
E10
Sno-Thro
Operator's Manual
Manuel du Utilisateur
Engine Model #
PE8HK17950178EGIOQTUVX59E1M
Engine Serial #
1798H0206719A
Snowblower
Model # 920149
Serial # 306875
ENGLISH
FRANÇAIS
Date Of Purchase
3/19/2019
306CC Engine
38oz. 5W30 Oil
Drive Belt: 07200101
Auger Belts: 07200608
•
05135700C
4/18
Printed in USA
®

Advertisement

Table of Contents
loading

Related Manuals for Ariens Sno-Thro Deluxe 30 EFI

Summary of Contents for Ariens Sno-Thro Deluxe 30 EFI

  • Page 1 Sno-Thro ® Operator’s Manual Manuel du Utilisateur Deluxe Series Model Engine Model # 921049 – Deluxe 30 EFI PE8HK17950178EGIOQTUVX59E1M Engine Serial # (SN 035000 +) 1798H0206719A Snowblower Date Of Purchase Model # 920149 3/19/2019 Serial # 306875 306CC Engine 38oz. 5W30 Oil Drive Belt: 07200101 Auger Belts: 07200608 ENGLISH...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS WELCOME ..... . 1 Transport Unit ....12 MAINTENANCE .

  • Page 3: Welcome

    WELCOME Congratulations on your purchase and welcome to the Ariens family! Every snow thrower in the Ariens lineup is designed for long-lasting and unsurpassed performance. We are confident your machine will be part of your family for many years to come.

  • Page 4: Safety

    • BECOME ALERT! penalties. Emission controls and components • OBEY THE MESSAGE! can only be adjusted by an Ariens Company dealer or an authorized engine SIGNAL WORDS manufacturer's service center. Contact your The safety alert symbol above and signal Ariens Company Equipment Retailer...

  • Page 5: Safety Decals

    4. Notice Safety Decal Descriptions NOTICE: Indicates information or procedures 1. CAUTION! that are considered important but not hazard related. If not followed, property damage could result. Danger! 5. Important IMPORTANT: Indicates general reference information worthy of special attention. SAFETY DECALS Only use clean-out tool to The safety decals on your machine are visual clear blockages.

  • Page 6: Safety Rules

    SAFETY RULES 2. DANGER! The following safety instructions are based on the B71.3 specifications of the American National Standards Institute in effect at the Danger! time of production. Training Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit.
  • Page 7 Handle fuel with care; it is highly flammable. Thrown objects can cause injury. Check for weak spots on docks, ramps or floors. Avoid • Use an approved fuel container. uneven work areas and rough terrain and • Never add fuel to a running engine or hot stay alert for hidden hazards.
  • Page 8 Disengage attachment when not in use and Maintenance and Storage when traveling from one work area to Secure unit so it will not tip over during another. maintenance. Disengage power to the auger / impeller Before cleaning, removing clogs or making when snow thrower is transported or not in any inspections, repairs, etc., disengage use.
  • Page 9 Avoid starting or stopping on a Accessories slope. Do not park unit on a slope unless absolutely necessary. When parking on a Use only Ariens Company-recommended slope always block the wheels. attachments or accessories that are Do not operate near drop-offs, ditches, or designed for your unit and that are embankments.

  • Page 10: Controls & Features

    CONTROLS & FEATURES Figure 3 1. Engine Key 16. Discharge Chute Deflector Lever 2. Fuel Tank and Cap 17. Heated Hand Grip Switch 3. Electric Start Button 18. Scraper Blade 4. Throttle Control Knob 19. Skid Shoe (2) 5. Oil Fill / Dipstick 20.

  • Page 11: Engine Key

    ATTACHMENT CLUTCH LEVER WARNING: Read and (RIGHT SIDE) understand the Safety section See Figure 6. before proceeding. Controls auger / impeller movement. See Figure 3 for all controls and features locations. ENGINE KEY See Figure 4. Controls power to the engine. The key cannot be removed when in run position.

  • Page 12: Speed Selector Lever

    SPEED SELECTOR LEVER DISCHARGE CHUTE DEFLECTOR LEVER See Figure 8. Controls the speed of forward and reverse See Figure 10. travel. Moves discharge deflector up or down to control height of snow discharge. Figure 8 Figure 10 DUAL HANDLE INTERLOCK HEATED HAND GRIP SWITCH Allows auger / impeller to rotate without Turns the heated hand grips on and off.

  • Page 13: Operation

    87. DO NOT use E85 blended fuels; the engine is not E20 / E30 / E85 compatible. The maximum recommended ethanol content is 10%. Ariens recommends using a quality fuel stabilizer in all fuel. See Short Term on page 24.

  • Page 14: Operate Unit

    Safety section OPERATE UNIT before proceeding. 1. Rotate discharge chute and move Your Ariens dealer can provide service and deflector to desired positions. adjustments to keep your unit operating at 2. Select desired speed. peak efficiency. Contact an authorized engine 3.

  • Page 15: Maintenance Schedule

    • 414 ml (14 oz) cartridge (1) 00036700 WARNING: AVOID INJURY. Explosive separation of tire and Ariens L3 Lube – 237 ml (8 oz) 00068800 rim parts is possible. Shear Bolt and Nut 52100100 • DO NOT inflate tires above Fuel Stabilizer –...

  • Page 16: Check Engine Oil

    6.1 cm – 6.7 cm (2.4" – 2.6") from the flat surface of the gearcase cover. IMPORTANT: Ariens recommends using only Ariens L3 synthetic severe duty gear lube (see Service Parts on page 13). Using other lubricants will not automatically void unit...

  • Page 17: Charge Battery

    2. Apply grease at the grease zerks. See Figure 17. Figure 17 Figure 15 3. Hand rotate auger on auger shaft. Auger Shaft 4. Align shear bolt holes in auger with shear 1. Remove shear bolt nuts and bolts. See bolt holes in shaft.

  • Page 18: Adjustments

    IMPORTANT: Battery charger is shipped in ADJUSTMENTS the literature pack. 2. Connect battery connector to charger. See Figure 19. WARNING: AVOID INJURY. Read and understand the Safety section before proceeding. ADJUST SCRAPER BLADE The auger housing may be damaged if blade wears down too much.

  • Page 19: Replace Shear Bolts

    1. Replacement Shear Bolts Figure 21 IMPORTANT: Ariens recommends using only Ariens OEM shear bolts when replacing shear bolts. See Service Parts on page 13. See Figure 16. 1. Align shear bolt holes in auger with shear bolt holes in the shaft.

  • Page 20: Adjust Speed Selector Lever

    ADJUST SPEED SELECTOR ADJUST ATTACHMENT CLUTCH LEVER & BRAKE See Figure 25. WARNING: AVOID INJURY. 1. Disconnect adjustment pivot pin from Improper adjustment could speed selector arm. Save hardware for result in unexpected movement reinstallation. of auger and impeller causing 2.
  • Page 21 5. With attachment clutch disengaged, • If roller is 12.7 mm – 22.2 mm make sure auger idler arm lightly touches (1/2" – 7/8") from frame, no further the frame. See Figure 27. adjustment is required. See Figure 29. • If roller is less than 12.7 mm (1/2") from frame, loosen idler adjustment nut and move idler closer to belt.

  • Page 22: Adjust Traction Drive Clutch

    Check Attachment Brake With the attachment clutch disengaged, brake pad must contact attachment belt or pulley, whichever is closest. With attachment clutch engaged, brake pad must be a minimum of 1.6 mm (1/16") from belt or pulley. See Figure 30. Measure here.
  • Page 23 4. With traction clutch disengaged, check that the drive plate touches the stop bolt. See Figure 33. 1. Drive Plate 2. Stop Bolt Figure 33 5. Reconnect spark plug wire. EN - 21...

  • Page 24: Troubleshooting

    Spark plug is faulty. Replace spark plug. Refer to engine start. manual. Engine is faulty. See your Ariens dealer or authorized engine manufacturer’s service center. Battery is dead. See Charge Battery on page 15. See Controls & Features on page 8. Refer to the Service Guide for your unit.
  • Page 25 TROUBLESHOOTING Problem Probable Cause Correction Friction disc is worn. Replace friction disc. Refer to the Service Guide for your unit. Traction drive cable is not Remove slack from cable. See Adjust Unit does not adjusted correctly. Traction Drive Clutch on page 20. drive forward or Traction belt is not functioning.

  • Page 26: Storage

    ACCESSORIES SHORT TERM 1. Run auger / impeller for a few minutes to See your Ariens dealer for a complete list of remove loose or melting snow to prevent compatible accessories and attachments for impeller from freezing.

  • Page 27: Specifications

    SPECIFICATIONS Model Number 921049 Description Deluxe 30 EFI Engine Ariens AX Gross Torque* – N•m (lb-ft) 20.3 (15.0) 306.0 (16.7) Displacement – cm Maximum RPM – No Load 3600 ± 50 Electric Start 120V Fuel Tank Capacity – liter (qt) 1.9 (2.0)

  • Page 28: Warranty

    ® , Sno-Tek ® Finishing Tool Equipment Limited Warranty Warranty Ariens Company (Ariens) warrants to the original purchaser that Ariens, Gravely, Parker, and Countax ® ® brand chore-performing equipment (including Sno-Thro and Sno-Tek equipment) purchased on or after 1/1/2016 will be free from defects in material and workmanship for the time period noted in the chart below.
  • Page 29 To obtain warranty service, the original purchaser must: • Perform the maintenance and adjustments explained in the Owner's Manual. • Promptly notify Ariens or an authorized Ariens, Gravely, Parker or Countax service representative of the need for warranty service. • Transport the product to and from the place of warranty service at owner's expense.
  • Page 30 Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens, Gravely, Parker or Countax service parts are not covered by this warranty and may void the warranty. • Damages resulting from the installation or use of any part, accessory, or attachment which is not approved by the Ariens Company for use with product(s) identified herein are not covered by this warranty.
  • Page 32 655 West Ryan Street Brillion, WI 54110 ariensstore.com ariens.custhelp.com parts.ariens.com...

This manual is also suitable for:

Sno-thro deluxe seriesSno-thro 921049

Table of Contents