Dual-Handle Interlock Cam Replacement; Remove Interlock Cam - Ariens Sno-Thro Deluxe Series Service Manual

See Figure 83.
4. Align cable with cable pulley and tighten shoulder bolt.
5. Reconnect lower traction clutch cable to upper traction
clutch cable.
6. Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
7. Reconnect upper traction clutch cable to traction
clutch lever pin. Install spring on clutch lever pin and
retain with one flat steel washer and hairpin. See
Figure 79.
8. Return unit to operating position.
9. Adjust traction drive clutch. Refer to Operator's
Manual for adjustment procedure.
10. Reconnect spark plug wire and fill fuel tank.
IMPORTANT: Check all adjustments after first use.
Figure 83
DUAL-HANDLE INTERLOCK CAM
REPLACEMENT

Remove Interlock Cam

IMPORTANT: Save all hardware for reinstallation.
See Figure 84.
1. Remove spring from interlock bracket.
2. Remove two spring clips securing interlock cams to
camshafts.
Models 921045, 921046, 921048
1
2
Models 921047, 921049, 921323, 921324
1
1. Interlock Cam
2. Interlock Bracket
EN – 38
Figure 84
2