Fixing Onto Standard Mounting Rails - Siemens SCALANCE XB-000 Operating Instructions Manual

5.3

Fixing onto standard mounting rails

Mounting
To install the device on a 35 mm DIN rail, follow the steps below:
1. Place the housing guide of the device on the top edge of the DIN rail.
2. Push the device down against rail until it locks in place.
Figure 5-1
3. Fit the connectors for the power supply. See also section "Power supply (Page 49)"
4. Insert the terminal block into the sockets on the device.
Figure 5-2
SCALANCE XB-000
Operating Instructions, 01/2022, A2B00077300-11
Installation on a 35 mm DIN rail
SCALANCE XB-000 mounted on the 35 mm DIN rail
Assembly and disassembly
5.3 Fixing onto standard mounting rails
41