Fixing Onto Standard Mounting Rails - Siemens CSM 1277 Operating Instructions Manual

Mounting

4.2 Fixing onto standard mounting rails

4.2 Fixing onto standard mounting rails
Installation on a 35 mm DIN rail
Note
The CSM 1277 does not have a feedthrough for the backplane bus. It must therefore be
mounted either at the start or end of the S7-1200 station!
1. Place the upper guide at the top of the CSM housing in the 35 mm DIN rail (DIN EN
2. Push in the lower part of the CSM 1277 onto the rail until it locks in place.
20
60715 TH35 ).
Figure 4-1 Mounting the CSM 1277 on a DIN rail
Compact Switch Module CSM 1277
Operating Instructions, V. 1.20, A2B00079397B