New Holland B80B Service Manual page 38

8. Remove the access cover from the flywheel housing
(1).
Turn the flywheel for access to the cap screws.
Remove the cap screws to disconnect the torque con-
verter from the engine.
Connect lifting equipment to the lifting eyes on the en-
gine to hold the engine in place.
9. Remove the bolts (1), flat washers, and nuts from the
front engine mount.
Loosen and remove the cap screws and flat washers
that fasten the transmission to the engine.
Raise and remove the engine from the machine.
NOTICE: Make sure that the flex plate/converter assembly
stays in place on the transmission. If the engine will be
separated from the transmission for an extended period of
time fasten the flex plate/converter assembly in place on
the transmission.
Engine - Engine and crankcase
48143704 20/04/2017
10.1 [10.001] / 5
7
PTIL13TLB1470AA
8
PTIL13TLB0730AB
9
PTIL13TLB0729AA