New Holland B80B Service Manual page 36

Engine - Remove
Prior operation:
Refer to Basic instructions
Prior operation:
Refer to Hood - Remove (90.100)
Prior operation:
Refer to Radiator - Remove (10.400)
Prior operation:
Refer to Exhaust manifold - Remove (10.254)
NOTE: Put identification tags on all disconnected hoses
and wires. Close all disconnected hoses and fittings with
caps and plugs immediately.
NOTE: The images in this procedure may be different from
your machine and are for reference only.
ATTENTION: Allow the engine to reach normal tempera-
ture before performing any service or maintenance proce-
dure. Wear safety gloves and goggles for protection from
hot components and fluids or severe burns could result.
1. Drain engine oil by loosening the drain nut. Collect the
oil in a clean container, cap it and keep it aside in a
clean place.
2. Disconnect the fuel return and inlet lines (1) from the
mud filter (4) and cap them immediately.
Loosen the mounting bolts (2) and remove the assem-
bly (3) from the machine.
3. Remove the exhaust pipe (1) of the turbocharger and
cap it.
Engine - Engine and crankcase
48143704 20/04/2017
10.1 [10.001] / 3
1
PTIL13TLB0953AB
2
PTIL13TLB0956AB