Kohler C3-500 Homeowner's Manual page 8

E – DEFECATION WASH
When seated, press DEFECATIOND WASH to activate defecation
wash and display current wash strength.
Press DEFECATION WASH button again to change wash strength
when front wash function is activated. The wash strength shall be
changed per min dial, mid dial, max dial circulation.
It will stop automatically after 5 minutes of continuous flushing.
Note: when above wash function is activated, dryer and deodorizer function will be
automatically stopped.
F – WATER TEMP
Press WATER TEMP button to set water temp for wash functions. Each
click shall be circulated per OFF, LOW dial, LOW-MID dial, MID dial,
MID-MAX dial, MAX dial, MID-MAX dial sequence. Setup water temp
and change over water temp parameter indicating light. If it is OFF, the
indicating light is not illuminated.
G – MASSAGE
Press MASSAGE button to activate MASSAGE (massage + oscillate)
in the flush state.
Each click shall be circulated per MASSAGE, OSCILLATE, MASSAGE
+ OSCILLATE, stop MASSAGE + OSCILLATE sequence and light
corresponding LED up. If MASSAGE + OSCILLATE is OFF, the
indicating light is not illuminated.
H – SEAT TEMP
Press SEAT TEMP button to set seat temperature. Each click shall be
circulated per OFF, MIN dial, MIN-MID dial, MID dial, MID-MAX dial,
MAX dial, MAX-MID dial sequence to set seat temp and change over
seat temp parameter indicating LED. If ring temp is OFF, the indicating
light is not illuminated.
I – DRYER
When seated, press DRYER to activate dryer function. Stop dryer
function immediately if wash function is in use.
Indicating LED displays current dryer temp. Press DRYER button
again, dryer temp shall be circulated per MIN dial, MIN-MID dial, MID
dial, MID-MAX dial, MAX dial, MID-MAX dial sequence. It will auto
stop after 4 min consecutive work.
1338634-T01-E
8 Kohler Co.