Kohler C3-500 Homeowner's Manual page 16

9. Changing Deodorization Block/
Clean Deodorization Block Screen
Fig 1
IMPORTANT! Risk of product damage!
Do not apply excessive force to the louver while disassembly. Otherwise, it
may be damaged.
Remove cover first.
Warning! Cut off power supply and turn water inlet valve OFF.
Remove louver from the Bidet side (fig 1).
Pull deodorizer block out (fig 2).
Replace with a new one, reload into the vent.
Reinstall louver.
Make sure no impurities in the deodorization assembly before renewing the
deodorization block. If yes, remove impurities.
At the tip of cover bottom, unbuckle to remove deodorizer screen (fig 3).
Remove dust on screen, wipe dry and reinstall the screen.
Reinstall cover properly.
Turn on water inlet valve in turn and connect to power supply.
1338634-T01-E
Fig 2
16
Screen
Fig 3
Kohler Co.