Lubricating The Forefront Suspension Control Arms; Lubricate The Front Casters - Ferris ISX3300BVE37CE Operator's Manual

• deck lift pivots
• discharge chute hinge
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off belts
and pulleys. Remember to wipe fittings and surfaces clean
both before and after lubrication.
27
28
26
29
Lubricating the ForeFront Suspension
Control Arms
Interval: Every 50 hours.
Lubricate the ends of the four (4) ForeFront™ suspension
control arms with a petroleum based chain lube at the areas
identified as "A" in Figure 30.
30

Lubricate the Front Casters

Interval: Annually
1. Remove the 1/4-28 bolt (A, Figure 31) screwed into the
caster and install a 1/4-28 grease fitting.
ferrismowers.com