Playing Tracks In The Desired Order (Program Play); Playing Tracks Repeatedly (Repeat Play) - Sony MHC-W55 Operating Instructions Manual

0/)
=/+
CHECK
CLEAR
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Place the CD(s) on the disc tray.
3
Press PLAY MODE repeatedly until
"PROGRAM" and "DISC" appear in the
display.
CD
A
DOLBY NR B OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
DISC PROGRAM
4
Turn the JOG dial to choose a track.
The track number and the total playing
time appear.
Track number
CD
A
8
DOLBY NR B OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
DISC PROGRAM
Total playing time
5
Press ENTER/NEXT.
The chosen track number lights up in
the music calendar. If the track number
disappears before you press ENTER/
NEXT, go back to step 3.
6
To program additional tracks, repeat
steps 4 and 5.
7
Press ·P.
All the tracks play in the order you
choose.
To Press
Check the CHECK repeatedly*
program
P*
Program a pause 2
p
Stop play
Cancel program PLAY MODE*
play repeatedly until
"PROGRAM" or
"SHUFFLE" dissapear.
Erase a track CLEAR on the remote in
from the end stop mode
Erase a specific CHECK on the remote
track repeatedly so that the
number of the track
lights up, and press
CLEAR on the remote
p once in stop mode or
Erase the entire
program twice while playing
* 1 After the last track appeared "CHECK
END" appears in the display.
2
* "P" appears and the total playing time is
reset to 0.00.
* 3 The program is erased.
VOLUME
DBFB
To change the order of
programmed tracks
Erase the entire program and create a
new one.
Notes
•The program you made remains in the CD
player even after it has been played back.
VOLUME
Press ·P to play the same program
DBFB
again.
•If "--.--" appears instead of the total
playing time during programming, this
means
– you have programmed a track number
which exceeds 20,
– the total playing time has exceeded
100 minutes.
Playing Tracks
1
Repeatedly
(repeat play)
3
The repeat play function repeats a single
CD or all CDs in normal play, shuffle play
and program play.
Use the buttons on the unit to do this
operation.
SYSTEM
POWER m ON
REPEAT
Repeating all the tracks
1 Press REPEAT a few times until
"REPEAT" appears in the display.
2 Press ·P.
To
Repeat all the
tracks on the
current CD
Repeat all the
tracks on all CDs
Repeat only one
track
To cancel repeat play
Press REPEAT so that "REPEAT" or
"REPEAT 1" disappears from the display.
Chapter 2: the CD Player
EN
9
Press
1/ALL DISCS
repeatedly until "1
DISC" appears in the
display.
1/ALL DISCS
repeatedly until "ALL
DISCS" appears in the
display.
REPEAT repeatedly
until "REPEAT 1"
appears in the display
while playing the track
you want to repeat.