Programming Cd Tracks; Programme Play - Sony CHC-CL5MD Operating Instructions Manual

Programming CD tracks

— Programme Play

You can make a programme of up to 25 tracks.
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press PLAY MODE/DIRECTION
repeatedly until "PGM" appears.
3
Press CD 1 – 3 to select a CD.
To programme all the tracks on a CD at
once, proceed to step 5 with "AL"
displayed.
4
Turn ./> (or press . or > on
the remote) until the desired track
number appears.
Playing time of the selected track
Selected CD and track number
5
Press ENTER/YES.
The track is programmed.
"STEP" appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track or
"CD1-AL" appears, followed by the total
playing time of the programme.
Total playing time
Last programmed track number
6
To programme additional tracks, repeat
steps 3 to 5.
7
Press CD NX (or N on the remote).
To Do this
Cancel Press PLAY MODE/DIRECTION
Programme Play repeatedly until "PGM" and
"SHUFFLE" disappear.
Check the Press CHECK on the remote
programme repeatedly in stop mode. After the
last track, "Check End" appears.
Clear a track Press CLEAR on the remote in
from the end stop mode.
Clear a specific Press CHECK on the remote
track repeatedly in stop mode until the
number of the track to be erased
lights up, then press CLEAR.
Add a track to Perform steps 3 to 5.
the programme
in stop mode
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press CD NX.
• "- -.- -" appears when the total CD programme time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
11