Programming The Cd Tracks - Sony DHC-ZX50MD Operating Instructions Manual

Programming the CD
tracks
–– Progra m Pla y
You can make a program of up to 25 steps from
all the CDs in the order you want them to be
played.
?/1
(Power)
1
Press FUNCTION repeatedly until
"CD" appears in the display, then place
a CD.
2
While in stop mode, press MODE
SELECT repeatedly to select "Set Up
Mode", then press PUSH ENTER.
28
Downloaded from:
x
Multi stick
1
9
PUSH ENTER
1
https://www.usersmanualguide.com/
3
Move the multi stick toward b or B
repeatedly to select "CD Set Up ?", then
press PUSH ENTER.
4
Move the multi stick toward b or B
repeatedly to select "Program Set ?",
then press PUSH ENTER.
5
Move the multi stick toward v or V
repeatedly to select a CD.
2
If you want to program all the tracks on a CD
at once, select a CD in this step, then skip
step 6 and continue with step 7.
6
Move the multi stick toward b or B
repeatedly to select the desired track.
PROGRAM
7
Press PUSH ENTER.
The track is programmed. When all the
tracks are selected, "AL" appears in the
display and all the tracks are programmed as
one step. The program step number appears,
followed by the total playing time.
8
To program additional steps, repeat
steps 5 through 7.
Skip step 5 to select tracks from the
same disc.
9
Press CD NX.
All the tracks play in the order you selected.
Disc number Track number
Total playing time
(including selected track)