Setting The Clock Through An Internet Connection - Sony Giga Juke NAS-SC500PK Operating Instructions Manual

Setting the clock through an Internet
connection
You can set the clock by connecting the unit to
the NTP (Network Time Protocol) server on the
Internet.
Before using this function, make sure the network
setup has already been done (page 98).
1
Enter the Settings menu and select
[Basic settings] – [Clock setting].
The clock setting display appears.
2
Select [Online auto-sync clock
setting].
3
Select [On].
4
Select the desired city from the [Time
zone] setting.
If the desired city does not appear in the
[Time zone], select a city that is within the
same time zone as the desired city.
5
Select [Standard] or [Summer time]
for the [Summer time] setting.
6
Select [Server name].
The text input display appears.
If [NtpServer] appears, the unit connects
to the server that has been set. If the server
name is okay, go to step 8.
7
Enter the server name.
For details on entering text, see "Entering
text" on page 95.
8
Select [Apply].
The clock is automatically set.
9
Select [Close].
To restore the server name to its
factory setting
In step 7, press the CLEAR button repeatedly until
the server name is deleted, press ENTER, and then
select [Apply] in the clock setting display.
To cancel the procedure
Press BACK.
Notes
 The unit may not be able to connect to the NTP server
if the Internet setting has not been correctly done.
 If you are using a proxy server, transmissions may not
be relayed to the NTP server. If this happens, consult
your Internet service provider.
10
GB