Table of Contents
Advertisement
Information about this unit does not appear in
the [Media Sharing] section of Windows Media
Player 11.
The device appears as "Unknown Device". This is not
a problem.
Internet Radio
You cannot connect the unit to the Internet.
("Cannot connect to the radio station. " or "A
communication error occurred. Information
retrieval cancelled. " appears.) "GIGA JUKE
Wireless Player" appears and the unit does not
go on.
Make sure that the wireless station/the wireless LAN
access point is turned on.
The network settings on the unit may be incorrect.
Enter the Settings menu and select [Device
information] – [Network information] to check the
settings.
Place the unit and the wireless station/the wireless
LAN access point close to each other.
If your contract with your Internet provider limits
Internet connection to one device at a time, this
device will not be able to access the Internet when
another device is already connected. Consult your
carrier or service provider.
The sound skips.
The bandwidth of your wireless LAN may be too low.
Place the unit and the wireless station/the wireless
LAN access point close to each other, without any
obstacles between.
The list of radio stations in the display window is
different from the list which you edited on your
computer.
The clock in the unit has not been set, or the time
is incorrect. Enter the Settings menu and select
[Option] – [Clock] to set the correct time (page 31).
PARTY MODE
"Cannot play back. " appears.
You cannot play the following tracks:
A track that violates playback restrictions.
A track with irregular copyright information.
A track that you purchased at an online music
store that does not allow home network streaming.
"A communication error occurred. " appears.
Make sure that the wireless station/the wireless LAN
access point is turned on.
Make sure that your "GIGA JUKE" Music Server is
turned on.
The "GIGA JUKE" Music Server may be unstable.
Restart it.
Make sure that the "GIGA JUKE" Music Server is
connected to the wireless station/the wireless LAN
access point correctly.
Normal operations cannot be performed on the
unit.
Normal operations cannot be performed on the unit
while the unit is in PARTY MODE. To perform these
operations, first leave PARTY MODE.
You pressed the PARTY button to enter PARTY
MODE, but the track title, album title and artist
name do not appear on the unit and there is no
sound output.
If the "Host" was playing a track at the time you
pressed the PARTY button to enter PARTY MODE,
the unit will not start playing until the "Host" has
finished playing the current track and begins playing
the next track.
1
GB
Advertisement
Table of Contents
