Sony CMT-HX90BTR Operating Instructions Manual page 34

Enjoy the massive variety of audio from dab digital radio as well as from usb, bluetooth® and supplied ipod® dock. with digital s-master amp for crystal clear audio playback.
Table of Contents

Advertisement

Play does not start from the first
track.
 Press PLAY MODE
both "PGM" and "SHUF" disappear to
return to normal play.
Starting playback takes more time
than usual.
 The following discs take a longer time
to start playback.
 a disc recorded with a complicated
tree structure.
 a disc recorded in multisession
mode.
 a disc that has not been finalized (a
disc to which data can be added).
 a disc that has many folders.
Bluetooth device
Pairing cannot be done.
 Move the Bluetooth device closer to
the system.
 Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
 Enter the same passkey that was
entered at the Bluetooth device
correctly.
Connection is not possible.
 The Bluetooth device you attempted
to connect does not support the A2DP
profile, and cannot be connected with
the system.
 Enable the Bluetooth function of the
Bluetooth device.
 Establish a connection from the
Bluetooth device.
 The pairing registration information
has been erased. Perform the pairing
operation again.
 While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.

GB
repeatedly until
 Erase the pairing registration
information of a Bluetooth device and
perform the pairing operation again.
The sound skips or fluctuates, or the
connection is lost.
 The system and the Bluetooth device
are too far apart.
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
 Turn up the volume on your Bluetooth
device first, and then adjust the volume
using VOLUME +/
Severe hum or noise
 If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
 If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
 Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
 Turn down the volume of the system
using VOLUME 
headphones have a volume control,
also adjust the volume using the
headphone's volume control.
 Press DSGX
on the unit repeatedly
until "DSGX OFF" appears.
 Press EQ
repeatedly to select
"BASS" or "TREBLE, " and then press
repeatedly to turn down the
level.
.
. If your

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents