Table of Contents
Advertisement
Other Operations
Creating your own
program
(Program Play)
1
Select the desired function.
CD
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select the CD function.
USB
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly to select the USB function.
2
Press PLAY MODE
until "PGM" appears while the
system is stopped.
3
Press /
until the desired track or file
number appears.
When programming files, press
+/
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
Selected track or file number
0
GB
repeatedly
repeatedly
repeatedly to select the
Total playing time of
program (including
selected track or file)
4
Press
(or ENTER on the unit)
to add the track or file to the
program.
CD
" . " appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
USB
The total program time cannot be
displayed, so " . " appears.
5
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
6
To play your program of tracks
or files, press
The program remains available until
you open the disc tray or remove
the USB device. To play the same
program again, press
To cancel Program Play
Press PLAY MODE
"PGM" disappears while the system is
stopped.
To delete the last track or file of the
program
Press CLEAR
while the system is
stopped.
.
.
repeatedly until
Hide quick links:
Advertisement
Table of Contents
