Sony CMT-HX90BTR Operating Instructions Manual page 17

Enjoy the massive variety of audio from dab digital radio as well as from usb, bluetooth® and supplied ipod® dock. with digital s-master amp for crystal clear audio playback.
Table of Contents

Advertisement

4
Enter the passkey.
Passkey entry may be required
depending on the type of Bluetooth
device.
When "PIN?" and a countdown
appear, enter the passkey at the
system as follows:
Press / and /
on the remote (or
/  on the unit)
to enter the same passkey that was
entered at the Bluetooth device, and
then press
(or ENTER on the unit)
.
Once pairing is completed and the
connection is established, the system
display changes as follows:
"Connect"  Name of the Bluetooth
device
To cancel passkey entry partway
Press 
.
If passkey entry still required, turn off the
Bluetooth device.
Notes
 "Passkey" may be called "Passcode, " "PIN
code, " "PIN number" or "Password, " etc.
depending on the device.
 This system only supports numerical
passkeys up to 4 digits.
 The pairing standby status of the system is
cancelled after about 30 seconds.
 If pairing is not successful, redo the
procedure from step 1.
 While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
To erase all the pairing registration
information
1
2
+/ and
3
Note
In order to connect with a Bluetooth device
after performing this operation, you must enter
the passkey again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP.
1
2
Press BLUETOOTH 
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH
unit for about 2 seconds to put the
system in Bluetooth standby mode.
Press CLEAR
.
"Delete?" appears.
Press
(or ENTER on the unit)
"Complete!" appears and all the
pairing information is erased.
Select the Bluetooth function.
Press BLUETOOTH 
the unit.
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
"Connect"  Name of the Bluetooth
device
Continued
on the
on the
.
on
1
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents