Vision Fitness S60E Manual page 4

• Slide the CONSOLE MAST BOOT (1) onto the CONSOLE MAST(2).
1 • Put the console wire through console mast.
• Set console mast into the console mast bracket by 4 BOLTS (A) and 4 LOCK
WASHERS (B) by 8MM L-SHAPED WRENCH.
YELLOW BAG
Description
A M10x20L Socket Head Bolt
B M10 Spring Lock Washer
4
Qty
4
4
2
A
B
180°
• Attach right ADJUSTABLE ARM (3) onto the right side of base frame and fasten by by
2 BOLTS (C) and 2 FLAT WASHERS (D) by 8MM L-SHAPED WRENCH.
2
• Attach left ADJUSTABLE ARM (3) onto the left side of base frame by 2 BOLTS (C) and
2 FLAT WASHERS (D) by 8MM L-SHAPED WRENCH.
• Attention: DO NOT screw the bolts and washer tight, after Step 3 complete then
fasten all the bolts.
RED BAG
Description
C M12x 20L Bolt
D Flat Washer
1
Qty
4
4
3
D
C